CONFIGURATOR
RASPBERRY-PI , RASPBERRY PI, MODEL A+, 256MB, RASPBRRY-MODA+-256M SBC
- Brand: RASPBERRY PI
- ID number: 412/47
Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and VideoCore IV dual-core GPU
GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode
GPU is capable of 1Gpixel/s, 1.5Gtexel/s or 24GFLOPs with texture filtering and DMA infrastructure
256MB SDRAM (Model A+)
HD 1080p video output
Composite video (PAL/NTSC) output
Stereo audio output
10/100 BaseT RJ45 Ethernet socket (Model B+)
HDMI 1.3 & 1.4 video/audio socket
3.5mm 4-pole audio/composite video out jack socket
4 x USB 2.0 sockets (Model B+), 1 x USB 2.0 socket (Model A+)
15-way MPI CSI-2 connector for Raspberry Pi HD video camera (775-7731)
15-way Display Serial Interface connector
MicroSD card socket
Boots from MicroSD card, running a version of the Linux operating system (See Note below)
40-pin header for GPIO and serial buses (compatible with Raspberry Pi Model A/B 26-pin header)
Header footprint for JTAG connector
Power supply: +5V @ 2A via microUSB socket
Dimensions: 86 x 56 x 20mm (Model B+) 66 x 56 x 14mm (Model A+)
Firmware now looks for add-on boards that comply with the HAT (Hardware Attached on Top) design rules. This allows the Raspberry Pi A+/B+ to set up the GPIO and load drivers to suit an expansion board automatically.
